|
Pcsing soon and trying to pass my Monte project on to someone else. Car has a 350sbc and a th350 transmission. Was running and driving fine before I pulled the gas tank in order to rust bust, replace the wheelhouses, all the body mount bushings rear of the axle(completed), and replace the right side of the trunk panel along with its brace and the drop off panels on both sides. The following on the car is not installed: right side of trunk panel(was in the process of installation but was then deployed and couldn't finish), right rear wheelhouse, rear bumper and brackets, gas tank, trunk lid(was in the process of stripping and prepping for paint when I left). The rear end around the bumper is mostly down to bare metal and ready to have bondo applied to even the surface and painted. I replaced all of the cage nuts from the rear axle back and did minor repairs on the trunk as well as rust busted and applied multiple layers of paint in the hardest to reach areas. The inside of the car was completely stripped and seam sealed, then painted and is ready for carpet, I also have 2 red and black leather racing seats for it(only the drivers is currently installed, each seat has 5mm racing seat brackets along with 4 point harnesses, have the rear seat still but it needs to be re-upholstered. I also had custom work done to fix bad rusted holes underneath the rear windshield, the repairs were perfect and all the metal was painted before installing the new rear window. The rear quarters are pretty rusted and I was planning on having them replaced because I don't have enough experience with metalwork to do so myself. The car currently has the original wheels on it and will come with the 4 original 1 spare and 4 new torque thrust rims. The following is a list of items brand new from OPGI totaling well over 3500.00 that will accompany the car as well as miscellaneous items that I got for the build that will also come with the car. -new grant steering wheel with installation kit -new galvanized gas tank with new straps and silencing material -new fuel sending unit for gas tank -chrome eagle 111 torque thrust rims 11x8 for the rear and 11x7 for the front -all new wheelhouses for both sides -new right side trunk panel (new brace is already installed) -3 new trunk filler panels(ended up with an extra for one side) -body to frame bushings and hardware for the entire car -new license plate lamp -new brake light lenses -new bumper brackets not from opgi (extremely hard to find) -new light sockets for some of the lights in the rear(for some reason i was missing one light on each side when I bought the car) -headliner insulation material -headliner wire bows -kick panels w/ new kenwood speakers -new battery tray I have a spare 350 block with the crankshaft still installed and some heads that i was going to rebuild to swap the current engine out with, which will come with the car. Much much more to list, the car is currently in storage and i will not be able to take pictures of its current state or have anyone look at it until the 6th. Also the following pictures are what the car looked like before i started tearing it apart and after i painted etc. Not looking for trades, price is obo but i'm at least wanting to get half of what i have into it. Email me if interested, I won't be able to receive txts/calls until the 6th.
|
